> For the complete documentation index, see [llms.txt](https://blue-cc.gitbook.io/blue.cc-fn-setup/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://blue-cc.gitbook.io/blue.cc-fn-setup/steps/loading-from-efi.md).

# Loading from EFI

* After being done with the prerequisite settings on our board to load up to EFI, Reboot back into windows.

Then hold <mark style="color:blue;">Shift</mark> while you click the <mark style="color:blue;">restart</mark> button within windows - <mark style="color:purple;">Hold all the way until you see this:</mark>

&#x20;

<figure><img src="/files/gyZV1gluLWG8n1G6GirO" alt=""><figcaption></figcaption></figure>

Click on "<mark style="color:blue;">Use a device</mark>"

Now depending on either if you followed [Step 1-1: EFI - With USB](/blue.cc-fn-setup/steps/step-1-1-efi-with-usb.md) or [Step 1-1: EFI - Without USB](/blue.cc-fn-setup/steps/step-1-1-efi-without-usb.md) you will choose a different device

* If you used [Step 1-1: EFI - With USB](/blue.cc-fn-setup/steps/step-1-1-efi-with-usb.md) then select your usb, Should be something along the lines off  "<mark style="color:blue;">UEFI usb</mark>"
* If you used [Step 1-1: EFI - Without USB](/blue.cc-fn-setup/steps/step-1-1-efi-without-usb.md) then select "<mark style="color:blue;">UEFI OS</mark>"

After selecting either of these options you should boot back into windows with a messages saying "<mark style="color:blue;">Driver working</mark>" on boot.

If you get that message, you are good to follow the step below

{% content-ref url="/pages/ZeoDq9L9k0l6I4ehqD7j" %}
[Step 2 - Loader usage](/blue.cc-fn-setup/steps/step-2-loader-usage.md)
{% endcontent-ref %}

If not please refer to the below guide

{% content-ref url="/pages/ohaxl6n7rtqHUfLsms0N" %}
[Troubleshooting](/blue.cc-fn-setup/steps/troubleshooting.md)
{% endcontent-ref %}