# Step 1-1: EFI - With USB

Start by plugging in your USB into PC.

Then right click the USB -> Properties -> General and make sure it is in FAT32 File format.

![](https://1916225882-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXBhclxpOpOcEhj7hPZQe%2Fuploads%2FKacxB1f2EDASJrBB7Pt8%2Ffat32.PNG?alt=media\&token=2d1aae3c-c802-494e-ae8e-59e72810003e)            &#x20;

If your USB say <mark style="color:blue;">File system: FAT32</mark> then right click USB -> Format <mark style="color:blue;">and choose the following:</mark>

![](https://1916225882-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXBhclxpOpOcEhj7hPZQe%2Fuploads%2FfQFwuhnxxlSXeMIWkzPK%2Fformat.PNG?alt=media\&token=b2a8dfdb-e6c0-40fe-93a6-2ccfbed55ca3)&#x20;

Then click <mark style="color:blue;">Start</mark>.

Once that is done move all the files inside of <mark style="color:blue;">Copy The inside files to USB And boot it</mark> to USB.

<mark style="color:blue;">Should look like this</mark>

<figure><img src="https://1916225882-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXBhclxpOpOcEhj7hPZQe%2Fuploads%2Fwjsda6gFztATqUnioq4G%2FScreenshot%202024-02-24%20111543.png?alt=media&#x26;token=15fa7e97-0611-4d83-a7cb-13bb09fd0439" alt=""><figcaption></figcaption></figure>

Then hold <mark style="color:blue;">Shift</mark> while you click the restart button within windows - <mark style="color:purple;">Hold all the way until you see this:</mark>

&#x20;

<figure><img src="https://1916225882-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FXBhclxpOpOcEhj7hPZQe%2Fuploads%2F4hXY0lD4xVxzCiQxFDV7%2F3WSKs.png?alt=media&#x26;token=8d31c06b-f0da-4c25-ab3f-eabc9015720d" alt=""><figcaption></figcaption></figure>

<mark style="color:blue;">If you are 100% sure you have CSM, TPM & Secure boot disabled then click use a device and then click your USB.</mark>

<mark style="color:red;">DISCALIMER! This will not work if you dont turn off the above settings in your UEFI bios, Please don't continue following the tutorial without it.</mark>

If NOT then follow the following:

* Click <mark style="color:blue;">Troubleshoot</mark>
* Then <mark style="color:blue;">Advanced options</mark>
* Then <mark style="color:blue;">UEFI Firmware Settings</mark>
* Then <mark style="color:blue;">Restart</mark>

Once u are in Bios you need to turn off <mark style="color:blue;">CSM</mark>, <mark style="color:blue;">TPM</mark> & <mark style="color:blue;">Secure Boot</mark>.

Follow [bios-settings](https://blue-cc.gitbook.io/blue.cc-fn-setup/steps/bios-settings "mention")
